 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LM710/I SINGLE COMPARATOR HIGH SPEED VOLTAGE COMPARATOR 14 DIP The LM710/I is a high speed voltage comparator intended for use as an accurate, low-level digital level sensor or as a replacement for operational amplifiers in comparator applications where speed is of prime importance. The output of the comparator is compatible with all integrated logic forms. The LM710/I is useful as pulse height discriminators. a variable threshold Schmitt trigger, voltage comparator in high-speed A/D converters, a memory sense amplifier or a high noise immunity line receiver. 14SOP FEATURES l Low offset voltage: 5mV l High gain: 1000 V/V l High speed: 40ns Typ BLOCK DIAGRAM ORDERING INFORMATION Device LM710N LM710M LM710IN LM710IM Package 14 DIP 14 SOP 14 DIP 14 SOP -25 ~ 85C Operating Temperature 0 ~ 70C SCHEMATIC DIAGRM Rev. B (c)1999 Fairchild Semiconductor Corporation LM710/I ABSOLUTE MAXIMUM RATINGS Characteristic Positive Supply Voltage Negative Supply Voltage Peak Output Current Output Short Circuit Duration Differential Input Voltage Input Voltage Power Dissipation Operating Temperature Range LM710 LM710I Storage Temperature Range Symbol VCC VEE IPK VI(DIFF) VI PD T STG TSTG SINGLE COMPARATOR Value +14 -7 10 10 5 7 500 0 ~ + 70 - 25 ~ + 85 - 65 ~ + 150 Unit V V mA Sec V V mW C C C ELECTRICAL CHARACTERISTICS Characteristics Input Offset voltage Input Offset Current (Note 1) Input Bias Current Large Signal Voltage Gain Input Voltage Range Common Mode Rejection Ratio Differential Input Voltage Range Positive Output Level Negative Output Level Output Sink Current Positive Supply Current Negative Supply Current Power Consumption Response Time Symbol VIO IIO IBIAS (VCC = +12V, VEE= -6V, T = 25C, unless otherwise specified) Test Conditions Min LM710I Typ 0.6 0.75 1.8 5.0 27 1800 Max 2.0 3.0 3.0 7.0 20 45 1000 5.0 70 4.0 0 9.0 7.0 150 5.0 2.5 -1.0 1.6 Min LM710 Typ 1.6 1.8 7.0 25 1700 Max 5.0 6.5 5.0 7.5 25 40 mV nA nA V/V V 94 2.9 -0.5 2.2 4.7 4.0 40 9.0 7.0 150 4.0 0 dB V V V mA mA mA mV ns UNIT RS200, NOTE 1 Note1 Note 2 Note 2 Note 2 Gv Note 2 VI(R) VCC = -7V CMRR RS200, NOTE 2 VID(R) VO(H) VO(L) ISINK ICC IEE PD tRES 0 IO 5mA, VI 5mV VI5mV VO(P) =0V, VI 5mV VO(P) 0V VO(P) = 0V, VI = 5mV VO(P) = 0V, VI =10mV (Note 3) 1250 5.0 80 5.0 2.5 -1.0 2.0 95 2.9 -0.5 2.2 4.7 4.0 80 40 Note 1. The input offset voltage and input offset current are specified for a logic threshold voltage as follows: For 710I, 1.65V at -25C, 1.4V at +25C, 1.15V at +85C. For 710, 1.5V at 0C, 1.4V at +25C, 1.2V at +70C. Note 2. LM710: 0 TA +70C LM710I:-25 TA +85C Note 3. The response time specified is a 100mV input step with 5mV overdrive (LM710). LM710/I SINGLE COMPARATOR TYPICAL PERFORMANCE CHARACTERISTICS TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM DISCLAIMER ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. |
Price & Availability of LM710I
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |